Harley-Davidson BAKER COMPENSATING SPROCKET INSTALLATION INSTRUCTIONS
download 1) Remove the primary chain case cover. Refer to your Factory Service Manual for this procedure. 2) Remove the compensating sprocket nut with a 1-1/2″ socket. A ½” impact gun is best for this...
View ArticleBajaj Removing And refitting Automatic Cam Chain Tensioner
download 1. Remove the 2 Flanged Bolts securing the Tensioner Assembly. 2. Remove Tensioner Assembly from the engine block. 3. Unscrew and remove Lock Bolt. 4. Remove Pushrod, Ball & Retainer,...
View ArticleKawasaki KFX KLX 400 Camshafts Installation Instructions
download Remove the plug bolt from the back of the cam chain tensioner assembly. It is under pressure from the spring. Remove the spring and pin. Remove the bolts and tensioner assembly from the...
View ArticleYamaha YZ 250F Camshafts REMOVAL AND INSTALLATION MANUAL
download Remove the 4 bolts that hold the exhaust cam cap in place, lift the cam cap off. It may be necessary to pry very lightly on the cap to lift it off its dowel pins. Do not use the cam lobes as...
View ArticleYamaha YZ400/426F Camshafts REMOVAL AND INSTALLATION MANUAL
download Cleanliness is always a good place to start. Make sure the motorcycle is cleaned thoroughly before you start. It would be advisable to use an engine degreaser on the frame and the engine. This...
View ArticleHarley-Davidson CHAIN DRIVE INSTALLATION INSTRUCTIONS
download 1) Assemble & install the chain tensioner assembly over the primary chain as shown in figure 1. 2) Install the compensator sprocket with extender & spacer (numbers 5, 6, & 7, FIG...
View ArticleHARlEY DAVIDSON AUTOMATIC PRIMARY CHAIN TENSIONER INSTALLATION INSTRUCTIONS
download 1. Refer to the appropriate Service Manual and remove seat. To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before...
View ArticleMOTORCYCLE ROLLER CHAIN Maintenance and Lubrication
download Cleaning and Relubrication Perhaps the largest contributor to shortened chain life is inadequate lubrica- tion. All working parts of a chain should be lubricated uniformly. The use of the...
View Article1999 Toyota Camry LE V6 Body and Interior Maintenance Record
download Action Date Mileage Day Cost (with tax) By Interval Notes Oil and Oil Filter Change 8/30/1999 2494 Monday$77.97 Dealer 2494Non-synthetic 5w-30 (Toyota dealer stock) Oil and Oil Filter Change...
View ArticleKTM 250F Timing Chain Tensioner Installation Instructions
download 1) Remove OEM Tensioner: On some models including the 250F motors, it may be necessary to put the engine at TDC before proceeding. Check your manual. This is not the case on the 450 and 530...
View Article